# (55) Pandora occultation on 2019-12-07

Codex (GPT-6), 2026-11-21. Internal reference SIMDA-2026-001-v1. **CORA gives a volume-equivalent diameter of 90.14 km** when the published spin of DAMIT model 139 is held fixed. A phase test improves the limb fit and gives 87.02 km. The 2019 observations support a larger scale than the model's original 70 ± 7 km calibration from the 2007 occultation. The volume estimate remains provisional. [DAMIT model 139](https://damit.cuni.cz/projects/damit/asteroid_models/view/139) · [Ďurech et al. 2011, Table 3 and Figure 19](https://arxiv.org/pdf/1104.4227)

## Result

| Quantity | Local CORA result |
| --- | ---: |
| Scale relative to the 70 km mesh | 1.28767 |
| Volume-equivalent diameter | 90.14 km |
| Surface-area-equivalent diameter | 92.29 km |
| Projected area-equivalent diameter of the fitted model | 95.48 km |
| Separately fitted ellipse, full axes | 98.95 × 76.05 km |
| Projected area-equivalent diameter of the ellipse | 86.75 km |
| Positive endpoint RMS, fixed 70 km scale with translation | 9.50 km |
| Positive endpoint RMS, fitted scale and translation | 4.37 km |

The ellipse reproduces the **98.9 × 76.1 km** axes in the observer's Occult figure. That figure also displays a DAMIT volume diameter of **89.6 km** and a phase offset of −70°. Applying that offset to the CORA model as a diagnostic reduces the endpoint RMS to **1.78 km** and gives **87.02 km** volume-equivalent. The opposite sign gives 88.77 km with 5.96 km RMS. These runs use the same event as the figure, with a different implementation and potentially different fit settings. [Observer's Occult figure](https://dr-ricknolthenius.com/Apowers/A25spr20-Carrizo.pdf) · [IOTA reviewed event listing](https://www.asteroidoccultation.com/observations/Results/Reviewed/index2019.html)

Leaving out one positive chord at a time with the published phase gives **88.23–93.17 km**. That range measures sensitivity to chord selection. It does not include phase or shape uncertainty. The limb mismatch in the plot and the dependence on phase preclude quoting the fixed-phase result with a small formal error. With the SiMDA Gaia mass, the nominal density is **2.59 g/cm³** using 90.14 km, compared with **5.53 g/cm³** at 70 km. These densities use the central values only.

## Inputs and fit

- I used CORA's Python code at local commit `b9cc876` with SciPy 1.15.3 in the `cora` virtual environment. CORA's fundamental-plane and site projection routines take the timings to the sky plane. Its DAMIT projection uses ERFA and the archived mesh, and its SciPy least-squares solver fits a uniform scale and two translations to the unweighted endpoint-to-limb distances. The CORA ellipse routine provides a separate geometric check.
- The read-only CORA databases supplied the event geometry and ten positive chords for HIP 24832. The selected JPL109 prediction uses the bright Gaia DR3 source 182009826266321792, rather than the fainter companion also recorded for that date. The model projection epoch was the median positive chord midpoint, 2019-12-07.2019286 UTC. [Observer report on the resolved companion](https://iota-es.de/JOA/JOA2021_3.pdf)
- Four misses are recorded. The local Occult import assigns artificial start and end recording times, so this CORA fit uses the ten positive chords and leaves the four negative windows out. A joint fit with independently verified negative coverage would better constrain the poorly sampled side of the limb.
- The 2022 local DAMIT archive supplied the calibrated model 139 mesh and spin. The mesh checksum and exact prediction ID are in the [numeric results](result.json). Its starting volume-equivalent diameter computes to 70.000 km.

[Fit plot](profile.png) · [Projected chords and residuals](chords.csv) · [Reproduction script](fit_2019.py)

From the SiMDA project root, using the adjacent `CORA/django` checkout and the `cora` environment:

```bash
PYENV_VERSION=cora pyenv exec python -B work/55-pandora/fit_2019.py --output /tmp/simda-pandora-rerun
```

The script can take a different CORA path with `--cora`. It reads the local databases and mesh and writes the analysis outputs to the specified directory. Neither catalog was modified.
